I reviewed some of the cheap Chinese fountain pens last week where I mentioned that one was rather scratchy. I've been meaning to change the nib and replace the scratchy one with one of my grandfather's old nibs which I presume should be of better quality.
However, a google search this morning led me to these links -
http://www.quora.com/How-do-I-troubleshoot-a-scratchy-nib
https://www.youtube.com/watch?v=7WKo9nx8UdA
So I spent the last half hour trying it out on two pens that I was not completely satisfied with.
The result - much much better!! I will not be hesitating to use these pens anymore.
So what I did was, I got out one of my emery boards that I use for my nails and a buffer file as well (these are the ones with 4 different levels of roughness.
I started with the smoother side of the emery board, using a figure of eight movement, making circles clockwise and anticlockwise, up and down, and sideways movements. Some amount of emery board matter sticks on the nib tip but it's easy enough to just wipe off with a piece of cloth. After a few minutes of this, making sure that all sides of the nib tip have been rubbed enough, I then proceeded to rub it a bit on the smoothest area of the buffer file for a smooth finish.
Voila! It worked!
Note: I wanted to see if using the actual rough side of the emery board worked as well - yes, it does. No harm came to my nib!
However, a google search this morning led me to these links -
http://www.quora.com/How-do-I-troubleshoot-a-scratchy-nib
https://www.youtube.com/watch?v=7WKo9nx8UdA
So I spent the last half hour trying it out on two pens that I was not completely satisfied with.
The result - much much better!! I will not be hesitating to use these pens anymore.
So what I did was, I got out one of my emery boards that I use for my nails and a buffer file as well (these are the ones with 4 different levels of roughness.
I started with the smoother side of the emery board, using a figure of eight movement, making circles clockwise and anticlockwise, up and down, and sideways movements. Some amount of emery board matter sticks on the nib tip but it's easy enough to just wipe off with a piece of cloth. After a few minutes of this, making sure that all sides of the nib tip have been rubbed enough, I then proceeded to rub it a bit on the smoothest area of the buffer file for a smooth finish.
Voila! It worked!
Note: I wanted to see if using the actual rough side of the emery board worked as well - yes, it does. No harm came to my nib!
No comments:
Post a Comment